Time to fill measures the interval from an agreed opening date to an accepted offer. Time to hire measures the interval from the successful candidate entering the process for that role to accepting the offer. They share an endpoint but answer different questions.
For a SaaS, AI or technology business, the distinction matters when a sales vacancy delays customer coverage. A long search might reflect difficulty reaching suitable SDRs or AEs. It might also reflect a changing brief, slow interview feedback or delayed offer approval. The two headline numbers tell you where to investigate; stage-level evidence helps you decide what to change.
Use a consistent definition before comparing results. Applicant tracking systems and employers do not all start, stop or pause these clocks in the same way.
What is the difference between time to fill and time to hire?
Time to fill follows the approved opening; time to hire follows the successful candidate for that role. Both end at offer acceptance in this guide. Comparing time to fill vs time to hire helps separate the opening timeline from the candidate’s experience, but neither metric identifies the cause of delay on its own.
This guide uses calendar days, with elapsed time calculated by subtracting the start date from the end date.
| Metric | Start used in this guide | End | Question it helps answer |
|---|---|---|---|
| Time to fill | Role approved and opened for recruiting | Offer accepted | How long did the opening take to fill? |
| Time to hire | Successful candidate entered the process for this role | Offer accepted | How long did that candidate’s hiring process take? |
| Acceptance-to-start interval | Offer accepted | First working day | How long until the person actually joined? |
Workable’s recruiting-metrics guide distinguishes the opening-level and candidate-level measures and explains that employers may choose different time-to-fill start events. Indeed’s comparison similarly emphasizes consistent starting points.
If your team measures from the job-posting date instead of approval, document that choice. A report can be internally consistent with either convention, but you should not compare the two as though they measure the same interval.
How do you calculate time to fill and time to hire?
Time to fill = offer acceptance date − approved opening date.
Time to hire = offer acceptance date − successful candidate’s entry date for this role.
Acceptance-to-start interval = first working day − offer acceptance date.
Consider this fictional SDR search, included only to demonstrate the arithmetic:
| Event | Date |
|---|---|
| Role approved and opened | September 1 |
| Successful candidate entered the process | September 11 |
| First interview | September 14 |
| Final assessment completed | September 21 |
| Offer issued | September 23 |
| Offer accepted | September 26 |
| Employee started | October 12 |
Using the definitions above:
- Time to fill: September 26 minus September 1 = 25 calendar days.
- Time to hire: September 26 minus September 11 = 15 calendar days.
- Acceptance-to-start interval: October 12 minus September 26 = 16 calendar days.
The opening-to-start interval is 41 calendar days. That is useful for staffing readiness, but it is not the time-to-fill measure defined here. These figures are examples, not recommended targets or UltraTalent performance claims.
For a simple calculation spreadsheet, keep one row per completed opening with the approved opening date, successful candidate’s role-entry date, acceptance date and start date. Subtract the relevant date cells to calculate elapsed calendar days. Validate missing dates and reversed event sequences before averaging the results; document any working-day or pause rules separately.
A short measurement note prevents a surprising amount of confusion. Keep it with the dashboard or hiring report.
Choose calendar or working days
Calendar days describe elapsed time, including weekends. Working-day calculations require a shared calendar and holiday rules. Label the unit and use it consistently across the comparison.
Do not silently switch units because a search looks slower than expected.
Record holds without hiding elapsed time
Suppose a hiring freeze pauses an AE search. Retain the date it paused, when it resumed and why. You can report both total elapsed time and a separate active-search measure, provided their definitions are clear.
Check what your ATS actually exports. JobScore’s documentation, for example, says its time-to-fill calculation counts days in specified active job statuses, while its time-to-hire calculation uses elapsed days from candidate assignment to acceptance. That is a product-specific convention, not a rule every system follows.
Use the candidate’s entry for this role
An AE may already be in your talent database from a previous conversation. The date their contact record was created may not be when they entered the current search.
Choose a role-specific entry event, such as application or documented entry into consideration for that opening. Preserve the underlying dates so you can explain how the system produced the metric.
Separate evergreen recruiting from individual openings
A continuously open SDR advertisement can support several hires. Its original publication date may be a poor start date for each new seat.
Where possible, track individual approved openings and their outcomes. If your system cannot separate them, report evergreen hiring separately and explain the limitation. Avoid combining those figures with one-off replacement searches without qualification.
Define the reporting cohort
A report might include roles with accepted offers during the quarter, even if those roles opened earlier. That is a valid completed-hire cohort when labeled clearly.
State the period, number of hires, roles, markets and any exclusions. Keep hiring-market comparisons separate rather than assuming a US SDR search and an Australian enterprise AE search are interchangeable.
What is a good time-to-hire or time-to-fill benchmark?
A useful benchmark compares similar roles and markets using the same start event, endpoint and day-count convention. There is no universal average time to hire or time to fill that tells every employer whether its process is healthy. Use a consistently measured internal baseline, then inspect the stages behind unusually long or short results.
Completed-hire metrics leave out roles that are still open. A dashboard can appear faster because several easy searches closed while the difficult ones remain unresolved.
Review open-search age alongside completed time to fill. For active candidates, inspect time in the current stage and the date of the last meaningful update. Show the number of records behind every summary.
For completed hires, consider the median as well as the mean, and inspect unusually long cases rather than automatically deleting them. Compare similar roles and markets over a consistent period. If there are only a few hires, individual timelines may be more useful than a percentage change in the average.
Keep selection quality visible. Removing repeated interviews can be sensible; removing evidence needed to judge the role is a different decision. Review whether the hire starts, whether expectations were accurate and whether agreed early role outcomes are being met. Do not present a faster acceptance as proof of a better hire.
For the financial implications of an open seat, use the separate guide to evaluating recruitment through cash flow and runway. Keep that commercial assessment separate from the definition of your recruitment clocks.
Which stages are increasing your time to hire?
Once the definitions are stable, move beyond the headline averages. Look for repeated waiting time, missing evidence and decisions without an owner.
| Pattern to investigate | Evidence to inspect | Accountable owner | Possible response |
|---|---|---|---|
| Long time to fill, shorter time to hire | Brief changes, sourcing activity, qualified conversations and earlier candidate outcomes | Hiring manager and recruiter | Clarify must-haves or test a more relevant candidate pool |
| Candidates wait before a first interview | Screening completion and scheduling dates | Recruiter and hiring manager | Reserve interview availability and name a scheduling owner |
| Long gaps between assessments | Interview dates, submitted scorecards and debrief decisions | Interview lead | Remove repeated evidence requests and agree decision deadlines |
| Final assessment is complete but no offer is issued | Approval status, compensation sign-off and unresolved objections | Hiring manager with People/compensation owner | Resolve approval dependencies earlier |
| Offers remain undecided | Candidate questions, promised follow-ups and requested decision time | Recruiter and hiring manager | Supply missing information and agree the next conversation |
| Acceptance is quick but the start is distant | Agreed start date and documented dependencies | Hiring manager and People team | Plan coverage and onboarding around the actual start |
These are investigation paths, not automatic diagnoses. A longer interval may have a sensible explanation, including a candidate’s availability or an assessment needed for the role.
For an SDR or BDR, check whether interviewers agree on the prospecting and qualification responsibilities. For an AE, check whether they are assessing the same territory, customer segment and sales motion. Repeatedly reopening those questions can create more interviews without producing a clearer decision.
If the team cannot agree on the work or assessment evidence, return to the sales recruiting intake brief before changing the interview calendar.
How can employers reduce time to hire?
Reduce avoidable waiting where the stage data shows it. Confirm role requirements and assessment criteria before interviews, reserve decision-maker availability, collect scorecards promptly and settle offer approval dependencies before the finalist reaches the end of the process. Each change should have an owner and a measurable review point.
Consolidate interviews that collect the same evidence, but keep the work samples, references or other checks needed for a sound role-specific decision. Give candidates realistic next steps and time to consider the offer. Faster decisions should come from better preparation and less idle time, not pressure or weaker assessment.
Bring one open role and one recently completed search to the next review. Ask:
- Which dates and statuses produced these numbers?
- Where did the process wait longest?
- What evidence explains that wait?
- Who can change the relevant step?
- What will we check to see whether the change helped without weakening assessment?
Leave with one action, an owner and a review point. “Hire faster” gives the team little direction. “Agree the offer approver before the next finalist completes assessment” identifies a step someone can change.
What does a long time to fill but a short time to hire mean?
It means the opening existed for longer than the successful candidate’s recorded process, under the same clock conventions. That may reflect difficulty reaching suitable people, earlier candidates who did not progress, a changing brief, approvals or a paused search. The difference is not a pure measure of sourcing time.
In the fictional search above, the ten-day gap precedes the successful candidate’s entry. Review earlier candidate outcomes and the requisition history before choosing a remedy. More sourcing activity will not fix an unresolved role definition or approval dependency.
Time to fill is at least as long as time to hire when the opening predates candidate entry, the endpoint matches and both count days identically. Pre-existing pipelines or different pause rules can break that assumption; do not treat it as an invariant.
Does time to hire include the employee’s notice period?
No, under this guide’s offer-acceptance endpoint. Track the period from acceptance to the first working day separately as acceptance-to-start time. It may include a notice period and other agreed dependencies; do not assume all of it is notice.
The fictional example has 15 calendar days of time to hire and a further 16 days between acceptance and start. Together they inform staffing readiness, but combining them and calling the result time to hire changes the definition. Check how your ATS labels time to start before comparing its report with another source.
If you need help hiring an SDR, BDR or AE, discuss your sales hiring needs with UltraTalent. Share the role, hiring market and where the process is slowing down.


